HK Macau Stepwgn Club - Powered by Discuz! Board

標題: Stepwgn 2008 + iphone 叉電一問 [打印本頁]

作者: tonny_c 時間: 24-4-2010 23:09 標題: Stepwgn 2008 + iphone 叉電一問

各位C Hing,

我架車係日本水貨, 2008年尾..... 想幫部iphone係車到叉電 (我以前未試過用汽車叉電)
我搵到個"煙嘴"係中間控制波箱下面離地10寸的位置 (應該冇搵錯)
我將個叉電頭插入係"煙嘴", 但係唔知點解叉唔到電, 部電話一d 反應都冇.我試過將個叉電頭盡入但都係無反應.....

各C Hing, 有冇咪意見同辦法 ?

作者: tonny_c 時間: 27-4-2010 11:45

各位C Hing,

我架車係日本水貨, 2008年尾..... 想幫部iphone係車到叉電 (我以前未試過用汽車叉電)
我搵到個"煙嘴"係中間控制波箱下面離地10寸的位置 (應該冇搵錯)
我將個叉電頭插入係"煙嘴", 但係唔知點解叉唔到電, ...
tonny_c 發表於 24-4-2010 23:09

Dear Brother, please share your experience on this topic, tell me the exact location of "煙嘴", I'm starting to confuse myself where is the "煙嘴". Attached picture from manual, is that the circled one calls "煙嘴", if not, where should it be ??? Many Thanks[attach]623[/attach]

作者: sammykwan 時間: 27-4-2010 11:58

Dear Brother, please share your experience on this topic, tell me the exact location of "煙嘴", I'm starting to confuse myself where is the "煙嘴". Attached picture from manual, is that the circled ...
tonny_c 發表於 27-4-2010 11:45

Yes, that's right.

作者: Perry2007 時間: 27-4-2010 12:16

I can charge up my Nokia cell phone, iPod, PDA and etc. by insert right adapter into the "煙嘴".

作者: sammykwan 時間: 27-4-2010 12:18

各位C Hing,

我架車係日本水貨, 2008年尾..... 想幫部iphone係車到叉電 (我以前未試過用汽車叉電)
我搵到個"煙嘴"係中間控制波箱下面離地10寸的位置 (應該冇搵錯)
我將個叉電頭插入係"煙嘴", 但係唔知點解叉唔到電, ...
tonny_c 發表於 24-4-2010 23:09

It only has power when the key is turned to ignition on.

作者: tonny_c 時間: 27-4-2010 12:42

本帖最後由 tonny_c 於 27-4-2010 12:50 編輯

It only has power when the key is turned to ignition on.
sammykwan 發表於 27-4-2010 12:18

Sammy Hing,
How can I turn the ignition on ? do I need to press any button ? I only can see a hole when I opened the black cover and when I look inside, a white round plastic inside. I tried to press / twist / pull, no difference. my dear...........!

d 人話個個位可以用來點煙, 我覺得自己仲差好遠......

作者: alliven 時間: 27-4-2010 12:44

Sammy Hing,
How can I turn the ignition on ? do I need to press any button ? I only can see a hole when I opened the black cover and when I look inside, a white round plastic inside. I tried to pres ...
tonny_c 發表於 27-4-2010 12:42

擰條車匙一格="turn the ignition on" !!!

作者: tonny_c 時間: 27-4-2010 12:44

I can charge up my Nokia cell phone, iPod, PDA and etc. by insert right adapter into the "煙嘴".
Perry2007 發表於 27-4-2010 12:16

Dear Perry Hing, is that the "right adapter" means normal adaptor for car use, no special type for STEPWGN "water Good" or "Hong Good" ???

作者: sammykwan 時間: 27-4-2010 12:46

Dear Perry Hing, is that the "right adapter" means normal adaptor for car use, no special type for STEPWGN "water Good" or "Hong Good" ???
tonny_c 發表於 27-4-2010 12:44

No special charger, they are all standard........but are you sure your charge is working?

And are you trying to charge the phone when the car is running?

作者: alliven 時間: 27-4-2010 12:47

Dear Perry Hing, is that the "right adapter" means normal adaptor for car use, no special type for STEPWGN "water Good" or "Hong Good" ???
tonny_c 發表於 27-4-2010 12:44

12V點煙插,大多數是一樣的!

作者: tonny_c 時間: 27-4-2010 13:05

No special charger, they are all standard........but are you sure your charge is working?

And are you trying to charge the phone when the car is running?
sammykwan 發表於 27-4-2010 12:46

Sammy Hing, I bought a new one in phone store, I tired to charge it when the car is running, but no feedback ???

作者: tonny_c 時間: 27-4-2010 13:12

擰條車匙一格="turn the ignition on" !!!
alliven 發表於 27-4-2010 12:44

alliven hing,
個"long"入面有個白色的圈是否正常, 我覺得好似尼舊嘢預住左adapter入唔晒.....但又刮佢唔出....?

作者: joesik 時間: 27-4-2010 13:15

Please double check if your charger output is 1A or 0.5A .... if 0.5A .... throw it away ....
iPhone need 1A current to charge .....

作者: tonny_c 時間: 27-4-2010 13:24

Please double check if your charger output is 1A or 0.5A .... if 0.5A .... throw it away ....
iPhone need 1A current to charge .....
joesik 發表於 27-4-2010 13:15

個adaptor本身如果有電到, 應該會着灯, 再插上專為iphone的線應該就可以叉電.
但依家連adaptor個灯都着唔到 ........?(架車行緊)

作者: Perry2007 時間: 27-4-2010 13:46

你住邊區？如香港區，出o黎大家研究吓，睇吓我o個cheap cheap adapter得唔得？

作者: tonny_c 時間: 27-4-2010 13:55

你住邊區？如香港區，出o黎大家研究吓，睇吓我o個cheap cheap adapter得唔得？
Perry2007 發表於 27-4-2010 13:46

Perry Hing, North Point, where a u live ???

作者: sammykwan 時間: 27-4-2010 13:58

個adaptor本身如果有電到, 應該會着灯, 再插上專為iphone的線應該就可以叉電.
但依家連adaptor個灯都着唔到 ........?(架車行緊)
tonny_c 發表於 27-4-2010 13:24

no light, no power.......

作者: Perry2007 時間: 27-4-2010 14:00

Very close, PMed my contact no. to you. Let's check it.

作者: tonny_c 時間: 27-4-2010 14:06

你住邊區？如香港區，出o黎大家研究吓，睇吓我o個cheap cheap adapter得唔得？
Perry2007 發表於 27-4-2010 13:46

Perry hing, 我住北角, 你呢???

作者: tonny_c 時間: 29-4-2010 10:04

各位C Hing,
多謝大家提供意見, 最後終於搞點. 原來連接"煙嘴"條電線鬆左.(新車都會發生尼d事) 要拆晒成個"煙嘴"出來先知.
最搞笑係, 冇人知個"煙嘴"嘅fuse係邊, 腳制右邊排fuse箱係冇"煙嘴"的; 個sale 話check 完handbook 都唔知"煙嘴"fuse係邊, 叫我同車行check. 最後搵左相熟車行"電王"搞點左. ........又學多一樣嘢啦.

(特別鳴謝 Perry/Leon Hing)

作者: sammykwan 時間: 29-4-2010 10:11

各位C Hing,
多謝大家提供意見, 最後終於搞點. 原來連接"煙嘴"條電線鬆左.(新車都會發生尼d事) 要拆晒成個"煙嘴"出來先知.
最搞笑係, 冇人知個"煙嘴"嘅fuse係邊, 腳制右邊排fuse箱係冇"煙嘴"的; 個sale 話check 完h ...
tonny_c 發表於 29-4-2010 10:04

Good to know you got the problem solved.

作者: imstan 時間: 29-4-2010 10:44

各位C Hing,
多謝大家提供意見, 最後終於搞點. 原來連接"煙嘴"條電線鬆左.(新車都會發生尼d事) 要拆晒成個"煙嘴"出來先知.
最搞笑係, 冇人知個"煙嘴"嘅fuse係邊, 腳制右邊排fuse箱係冇"煙嘴"的; 個sale 話check 完h ...
tonny_c 發表於 29-4-2010 10:04

Thanks for your sharing!

歡迎光臨 HK Macau Stepwgn Club (http://www.stepwgnhk.com/)