HK Macau Stepwgn Club - Powered by Discuz! Board

標題: Connecting iPod to my RK [打印本頁]

作者: goblue 時間: 12-10-2010 00:21 標題: Connecting iPod to my RK

I'm trying to connect my iPod to the Kenwood stereo that comes with my RK1. It seems to me that I need a special cable with both a USB output and a aux-in output on the other end. Does any C.Hing 1) have any iPod-connecting experience to share and 2) know where I can get this cable at a reasonable price? Thanks.

作者: mr2turbohk 時間: 12-10-2010 16:09

Didn't it come with the stero headunit?

作者: MosTa 時間: 13-10-2010 15:16

last time, I asked the audio shop, he said need special ordering.. around 250~...to 400...

you can read the manual it has stated the name of that cable.. I think can direct order it, it pluged at the back of the audio screen.

作者: goblue 時間: 14-10-2010 21:53

Got it from ebay from around HKD 150

作者: moq 時間: 16-10-2010 13:23

4# goblue

wow,真係平過香港好多喎....如機頭是ddx5036 應可support 埋中文字的....

作者: lmk2006318 時間: 7-2-2011 00:37

me kenwood ddx5026 o.0''

作者: jumilla 時間: 7-2-2011 22:02

I am using a 3.5mm stereo jack connecting the iPod to the AUX in. Use Video mode to play.

作者: yik_cheung 時間: 13-4-2011 22:55

我想問一問買條KCA-IP301V cable 係唔係一定要拆機頭至裝到條線架?

作者: alliven 時間: 13-4-2011 23:26

我想問一問買條KCA-IP301V cable 係唔係一定要拆機頭至裝到條線架?,
yik_cheung 發表於 13-4-2011 22:55

Check this out!
http://www.kenwoodusa.com/UserFi ... nuals/kcaip301v.pdf

作者: yik_cheung 時間: 13-4-2011 23:41

咁即係要拆機頭..拖條線出來, 咁幾煩..有冇人知點係拆機頭出來裝條線呢?

作者: hk_allen 時間: 13-4-2011 23:48

本帖最後由 hk_allen 於 13-4-2011 23:49 編輯

咁即係要拆機頭..拖條線出來, 咁幾煩..有冇人知點係拆機頭出來裝條線呢?
yik_cheung 發表於 13-4-2011 23:41

DIY好玩架

BELOW is a link given by another c-hing
http://www.youtube.com/user/MexTonyHK#p/u/7/Lg0U_s3rqzg

作者: amuro 時間: 13-4-2011 23:55

I ordered the cable from ebay too. But I lost the "removal tool" as provided with the original pack. Can any ching lend me that set for installation? Thx in advance.

作者: alliven 時間: 14-4-2011 00:03

DIY好玩架

BELOW is a link given by another c-hing
http://www.youtube.com/user/MexTonyHK#p/u/7/Lg0U_s3rqzg
hk_allen 發表於 13-4-2011 23:48

人哋係RK呀志雲大師！

作者: hk_allen 時間: 14-4-2011 00:12

人哋係RK呀志雲大師！
alliven 發表於 14-4-2011 00:03

係喎sor sor

作者: yik_cheung 時間: 14-4-2011 00:13

本帖最後由 yik_cheung 於 14-4-2011 22:27 編輯

I ordered the cable from ebay too. But I lost the "removal tool" as provided with the original pack. Can any ching lend me that set for installation? Thx in advance.
amuro 發表於 13-4-2011 23:55

我出車時大昌都好似冇畀 removal tool 架喎..RK會唔會好似CHing 畀果條link咁拆法架..不過我都係度睇左好耐..都係唔知點拆

作者: yik_cheung 時間: 19-4-2011 05:57

請問有冇朋友知點樣可以拆個機頭出來

作者: alliven 時間: 19-4-2011 09:35

請問有冇朋友知點樣可以拆個機頭出來
yik_cheung 發表於 19-4-2011 05:57

http://www.stepwgnhk.com/redirec ... o=lastpost#lastpost

作者: yik_cheung 時間: 19-4-2011 11:55

Thx alliven

作者: alliven 時間: 19-4-2011 11:56

Thx alliven
yik_cheung 發表於 19-4-2011 11:55

You are welcome!!

作者: yik_cheung 時間: 19-4-2011 23:18

我終於打開到個底蓋, 同拆到兩粒鑼絲, 不過個機頭中控真係好緊, 我唔夠膽爆力打開..驚整爛個中控就煩啦! 算啦! 遲下再找人搞啦..

作者: MosTa 時間: 20-4-2011 11:46

Wei! u open? call me to see la... Yik!

MosTa

作者: yik_cheung 時間: 20-4-2011 13:57

Wei! u open? call me to see la... Yik!

MosTa
MosTa 發表於 20-4-2011 11:46

我都係跟alliven畀果段片去拆咋..不過我都係成功一半..我重未攞到個機頭出來..

歡迎光臨 HK Macau Stepwgn Club (http://www.stepwgnhk.com/)