Board logo

標題: DVD + 前後泊鏡頭 [打印本頁]

作者: lamb    時間: 1-12-2010 20:37     標題: DVD + 前後泊鏡頭

各位大C Hing, 有沒有好用的Model介紹 ?

九龍城, 土瓜灣或旺角 有沒有老實可靠的鋪頭?

福佬村道  創紀 有沒有人幫襯過?  OK嗎?
作者: lamb    時間: 2-12-2010 11:26

Oh no! I miss the boat. How much?
Where did u group order?
I am new comer. Where is the front and rear cam installed ?
Any recommended model and shop for DVD MON?
thanks
作者: sammykwan    時間: 2-12-2010 12:22

Oh no! I miss the boat. How much?
Where did u group order?
I am new comer. Where is the front and rear cam installed ?
Any recommended model and shop for DVD MON?
thanks
lamb 發表於 2-12-2010 11:26
It's a DIY order.......

Please join the club, and we have alot more to share in the member section.
作者: lamb    時間: 2-12-2010 12:50

Yes I will join.
But I must say WingHangBank is a bit inconvenient.
Do you have account in HSBC HangSeng BOC or.....?
Thanks
作者: sammykwan    時間: 2-12-2010 12:51

Yes I will join.
But I must say WingHangBank is a bit inconvenient.
Do you have account in HSBC HangSeng BOC or.....?
Thanks
lamb 發表於 2-12-2010 12:50
Sorry, only Wing Hang.
作者: lamb    時間: 2-12-2010 15:04

唔該晒,我已入數。
By the way,我幾鍾意閣下的外號稱- 掌摑王
點解會有呢個名?
作者: willi    時間: 2-12-2010 20:54

本帖最後由 willi 於 2-12-2010 20:56 編輯
福佬村道  創紀 有沒有人幫襯過?  OK嗎?
... 有 !   佢哋幾好架 ... 汽車黑盒 Video Camera $650  cam 連 labour, 唔錯 !!     其他也不錯 !
作者: lamb    時間: 2-12-2010 22:31

thanks.

What about the other one called 偉利 on the opposite side of 福佬村道?

今天去問過, D cam 好似平D, 但吾知老吾老實, 手工如何?
作者: sammykwan    時間: 2-12-2010 22:41

thanks.

What about the other one called 偉利 on the opposite side of 福佬村道?

今天去問過, D cam 好似平D, 但吾知老吾老實, 手工如何?
lamb 發表於 2-12-2010 22:31
I think Honda sales has refer some new car owners to 偉利......so they know Honda car quite well....

If you car is new from Honda dealer, then you may ask your sales to refer to their known shop to install cam. They can get you better price too......

But if you want to try DIY, then the cam + mon will cost you around $330.
作者: lamb    時間: 3-12-2010 11:01

I think Honda sales has refer some new car owners to 偉利......so they know Honda car quite well....

If you car is new from Honda dealer, then you may ask your sales to refer to their known shop to ...
sammykwan 發表於 2-12-2010 22:41
My Stepwgn is a second hand 06Nov 2.4Z.
作者: sammykwan    時間: 3-12-2010 11:03

My Stepwgn is a second hand 06Nov 2.4Z.
lamb 發表於 3-12-2010 11:01
I see.

Only very few Stepwgn don't have parking cam....
作者: lamb    時間: 3-12-2010 11:04

創紀 said front cam install on the Honda logo $1,000.  Rear cam $800
偉利 said front cam can install under the logo (i.e. no need to drill thru the logo).  Both front and rear cam cost $780 each.

Actually, where do you C hing usually install the front and rear cam?
作者: sammykwan    時間: 3-12-2010 11:13

創紀 said front cam install on the Honda logo $1,000.  Rear cam $800
偉利 said front cam can install under the logo (i.e. no need to drill thru the logo).  Both front and rear cam cost $780 each.

Act ...
lamb 發表於 3-12-2010 11:04
either installed by the sales (mine is from 偉利) or DIY at home....
作者: moq    時間: 3-12-2010 11:24

唔該晒,我已入數。
By the way,我幾鍾意閣下的外號稱- 掌摑王
點解會有呢個名?
lamb 發表於 2-12-2010 15:04
LAMB兄,WELCOME......咁你要睇多啲掌兄分享的VIDEO了...HAHA...
作者: lamb    時間: 3-12-2010 14:39

掌兄有上鏡嗎?
作者: sammykwan    時間: 3-12-2010 17:17

係我用車cam泊行車的片段
掌摑王 發表於 3-12-2010 16:41
there was one when you walk out from your car ......
作者: willi    時間: 6-12-2010 20:03

if you want to try DIY, then the cam + mon will cost you around $330.
... $330 ???    邊處呀 ?   Pls advise 喇 ?!               
作者: benko    時間: 7-12-2010 22:27

本帖最後由 benko 於 7-12-2010 22:30 編輯

我都想裝番個前cam,今日去偉利問過,要1380包裝
點解差咁多既...
另外想問前cam,睇唔睇到左右兩邊角位呢?
作者: sammykwan    時間: 7-12-2010 22:40

我都想裝番個前cam,今日去偉利問過,要1380包裝
點解差咁多既...
另外想問前cam,睇唔睇到左右兩邊角位呢?
benko 發表於 7-12-2010 22:27
DIY can save you some bucks.
作者: benko    時間: 7-12-2010 23:10

DIY can save you some bucks.
sammykwan 發表於 7-12-2010 22:40
如果我識裝,一定自己裝,可慳番d買其他玩具玩
(可惜我真係唔識)
作者: lamb    時間: 9-12-2010 09:58

Actually I have also asked 偉利 for the front cam.  They said there's no difference between front cam and rear cam.

Depending on the quality of the cam, it ranges from $780 to $1380+.  The one with CMOS or CCD is more expensive, but the guy said the $780 one is already OK.
作者: MosTa    時間: 9-12-2010 17:50

創紀.. I have tried.. service is okay not bad.
作者: willi    時間: 10-12-2010 22:42

創紀.. I have tried.. service is okay not bad
... indeed,  but how about the other one -  偉利  ??
作者: willi    時間: 10-12-2010 22:43

... indeed,  but how about the other one -  偉利  ??
... as i need to pick one - by tomorrow ?!    Please ?!
作者: willi    時間: 13-12-2010 12:34

Only very few Stepwgn don't have parking cam....
... beside, i am the one of who/which doesn't carry parking cam 喇 !!        ... (開口中)
作者: sammykwan    時間: 13-12-2010 12:37

... as i need to pick one - by tomorrow ?!    Please ?!
willi 發表於 10-12-2010 22:43
my cam is installed at wai lee by the sales.


so far working no problem for over 2 1/2 years.
作者: willi    時間: 14-12-2010 10:29

my cam is installed at wai lee
... Ok,  thx                     




歡迎光臨 HK Macau Stepwgn Club (http://www.stepwgnhk.com/) Powered by Discuz! 7.0.0