HK Macau Stepwgn Club - Powered by Discuz! Board

標題: 請問RK1尾燈點拆 ? [打印本頁]

作者: platform 時間: 3-3-2011 00:28 標題: 請問RK1尾燈點拆 ?

I followed the manual and removed the two screws. But cannot take out the lamp cover. It seems there is 有扣扣住 on the other side. Any C Hing can tell me the trick? Thanks.

作者: fw18 時間: 3-3-2011 08:59

哈哈又偷電.....

鬆咗2粒鑼絲，跟住manual話個方向，向外(右燈向右，左燈向左)推。
上邊粒碼仔會緊d，下邊粒碼仔會鬆d。建議用手按住燈座下面，跟住用拳頭係上鑼絲位用力向外dup.....

GOOD LUCK

作者: chowchow115 時間: 3-3-2011 09:05

I followed the manual and removed the two screws. But cannot take out the lamp cover. It seems there is 有扣扣住 on the other side. Any C Hing can tell me the trick? Thanks.
platform 發表於 3-3-2011 00:28

ching...見議你柝尾門板換..

作者: fw18 時間: 3-3-2011 09:06

ching...見議你柝尾門板換..
chowchow115 發表於 3-3-2011 09:05

ching, 佢好似唔係拆牌燈喎......

作者: chowchow115 時間: 3-3-2011 09:17

ching, 佢好似唔係拆牌燈喎......
fw18 發表於 3-3-2011 09:06

sorry..係我未訓醒...看多左個字...

作者: platform 時間: 4-3-2011 01:15

Thanks fw18. I was not sure about the direction to remove the lamp and worry to use any force may damage the lamp or side panel. I will try again using your method.

作者: fw18 時間: 4-3-2011 08:27

Thanks fw18. I was not sure about the direction to remove the lamp and worry to use any force may damage the lamp or side panel. I will try again using your method.
platform 發表於 4-3-2011 01:15

ching, 就住度力喎......

作者: platform 時間: 13-3-2011 16:17

Hi fw18 Ching,
I try your method today. 下邊粒碼仔ok but 上邊粒碼仔 is very tight. I try to push but the lamp cannot come out. I don't think remove the side panel can help.

There must be a way to take it out but how??

作者: fw18 時間: 14-3-2011 13:04

本帖最後由 fw18 於 14-3-2011 13:14 編輯

第一次係噤。我都攪咗幾次先得。之前個方法係最易了。因為下邊粒碼仔一推就出，所以要用手按住燈座下面，推出上邊粒碼仔先。如果唔係好難拆個燈座。記住，先拆上，后拆下。唔係好易拉爆.....

ching, 你多數係邊區出末呀?

作者: 老友鬼鬼 時間: 19-11-2011 13:24

不如搵 ching 拍Ｄ示範片擺上黎公朱同好，我今朝拆燈座又遇到同样問題，
又怕 dup 爆个燈座

作者: 老友鬼鬼 時間: 19-11-2011 13:48

茶實糸咪拆兩粒鑼絲，跟住用少少力向外一拉就OK

作者: Aliens 時間: 19-11-2011 14:35

其實拆咗螺絲之後，喺趟門條糟果個窿向外拉，就好容易拆出黎

作者: 老友鬼鬼 時間: 19-11-2011 14:42

其實拆咗螺絲之後，喺趟門條糟果個窿向外拉，就好容易拆出黎
Aliens 發表於 19-11-2011 14:35

later try again sin, thanks

歡迎光臨 HK Macau Stepwgn Club (http://www.stepwgnhk.com/)